Model M20 Benchtop Coil Winder
with MCS2 Control and Servomotor Traverse
|
MACHINE |
|||
|
Model M20 |
|||
|
Wire size: |
50
to 14 AWG |
||
|
Maximum coil
diameter: |
8" (203mm) with guard | ||
|
Spindle height: |
6
5/8 inches / 168 mm |
||
|
Output
shaft diameter: |
1/2" shaft with flat | ||
|
Spindle
motor: |
30 lb/in, 4000 RPM, 1.9 HP, Brushless Servomotor | ||
|
Spindle
drive: |
PWM Brushless Servo amplifier | ||
|
Standard
ratios (belt & pulley): |
3.13:1, 1:1, 1:3.13 | ||
|
Spindle
speeds: |
RPM | Ratio | Torque |
| 12500 | 3.13:1 | 9.6
lb/in, .8 lb/ft |
|
| 4000 | 1:1 | 30
lb/in, 2.5 lb/ft |
|
| 1275 | 1:3.13 | 94 lb/in, 7.83 lb/ft | |
| Spindle positioning: | .45 degree ~ 800 Counts per Rev | ||
| Traverse
drive: |
35 oz/in, 7500 RPM Brushless Servomotor | ||
| Pitch Resolution: | .000001" (.0001 mm) | ||
| X Axis Speed: | 375 in/minute (158mm/second) | ||
| X Axis Travel (standard): | 8" (203mm) | ||
| X Axis Travel (extended): | 4" (101mm) | ||
| X Axis Position Resolution: | .001" (.01mm) inch or metric | ||
| Tailstock
bearing inside diameter: |
.393" (10 mm) | ||
| Tailstock
travel: |
3 1/4" | ||
| Maximum
distance between centers: |
6" (152mm) extra distance optional | ||
|
Power
requirements: |
240
VAC 3 Ph
50/60 Hz 1.5 KVA |
||
| Spindle Brake: | DC Electromagnetic (Programmable) | ||
| Tailstock: | Hand operated w/safety interlock | ||
| Guard System: | Hand operated w/safety interlock | ||
| Weight: | Approx. 250# (113 Kg) | ||
| Dimensions: | D-23" (584mm) W-47" (1194mm) H-20" (508mm) | ||
| CONTROL | |||
| Model MCS2 | |||
| Control
Type: |
Embedded
- Freescale 32 bit Processors |
||
| Display: |
4
line x 40 Character Backlit LCD |
||
| Input
Keypad: |
24
Key (1/2" Rubber Tactile Touch) |
||
| Program
Storage: |
3500 lines / Complex and 99 Presets / Simple | ||
| I/O
Points: |
3
in / 3 out (24 VDC) |
||
| Operation
System: |
Microsoft
Windows XP/ 7 / 10 GUI |
||
| Programming
Software: |
MCSCOM
Graphical User Interface |
||
| Interface: |
RS232
for PC Interface |
||
| Network: |
Optional
USB |
||
|
OPTIONS |
|||
| Foot Pedal Control: | Variable
Speed w/On-Off Switch |
||
| Wire Guide Assembly: | Eyelet, Pulley or Optional "Electro Guide" | ||
| Dereeler
Ports: |
1
to 4 for Hysteresis Brake w/Tension Switch |
||
| Additional
I/O Points: |
8
in / 8 out (24 VDC) |
||
| Wire
Tensioning: |
Friction
or Programmable Hysteresis Brake |
||
Machine
Control Specialists, Inc.
35 N
Garden Avenue
Roselle,
IL 60172-1742
Voice:
630-980-3200 Fax: 630-980-3249
Email:
info@mcsinc.com
Last Update: July 19, 2017
